Page 1 of 11

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 305

Application of Simultaneous Equations to Estimate the

Exchange Rate Model in Sudan

Dr: Elsiddg Idriss Mohamed

Department of Statistics - Collage of Science- University of Tabuk (KSA)

Department of Statistics - Collage of Science- Sudan University of Science and Technology

Email-eidriss@ut.edu.sa

Abstract

This paper aims to study the variables

that affect the exchange rate in Sudan,

and their impact on inflation, Gross

domestic product, exports and imports of

Sudan by using an econometric model.

Most of the previous studies have

focused on studying the exchange rate

from the economical point of view and

did not focus on measuring the impact

of the variables that affect the

exchange rate through statistical

models as well as the effects resulting

from the overlap and interaction of

macroeconomic variables. We found

that there are statistically significant

negative relationships between (rate of

inflation - volume of imports) and the

exchange rate in the Sudan and also

there are statistically significant

positive relationships between (degree

of openness - foreign exchange

reserves - flow of foreign capital -

volume of exports) and the exchange

rate in Sudan.

Keywords: Exchange Rate, Simultaneous

Equation, Estimation, Econometric Standard.

1. Introduction

As a result of trade in goods and

services between countries originated

the concept of the exchange rate. The

exchange rate is price of a nation’s

currency in terms of another currency.

An exchange rate thus has two

components, the domestic currency and

a foreign currency, and can be quoted

either directly or indirectly. In a direct

quotation, the price of a unit of foreign

currency is expressed in terms of the

domestic currency. In an indirect

quotation, the price of a unit of

domestic currency is expressed in terms

of the foreign currency. An exchange

rate that does not have the domestic

currency as one of the two currency

components is known as a cross

currency, or cross rate. Also known as a

currency quotation, the foreign

exchange rate or forex rate.

The exchange rate is the most

important instrument of monetary

policy because it affects the other

economic indicators, as well as

influenced by internal and external

conditions.

Among the most important economic

and financial factors that determine the

exchange rate, the degree of openness

Page 2 of 11

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 306

to the outside world, the structure of

imports and exports, the movement of

capital flows to and from the state, the

rate of inflation, and the foreign

exchange reserves.

2. Theoretical framework

2.1. Types of exchange rate

There are many types of exchange rate

such as:

(1) Fixed Exchange Rate.

(2) Adjustable Exchange Rate.

(3) Flexible Exchange Rates

(4) Intermediate Exchange Rates

(5) The real exchange rate

2.2 Determination of Exchange Rate

There are a number of theories that are

used to determine the exchange rate,

some of these theories are:

(1) Quantity Theory

(2) Balance Theory

(3) Theory of Discount Rate

(4) Theory of Purchasing Power

(5) Productivity Theory

2.3 Simultaneous equations model

Suppose there are m regression

equations of the form

yit = ý−1,tγi + x́

itβi + uit , i=1,...m,

where i is the equation number, and

t = 1, ..., T is the observation index. In

these equations xit is the ki×1 vector of

exogenous variables, yit is the

dependent variable, y−it is the ni×1

vector of all other endogenous variables

which enter the i

th equation on the

right-hand side, and uitare the error

terms. The “-i” notation indicates that

the vector y−itmay contain any of

the y’s except for yit (since it is already

present on the left-hand side). The

regression coefficients βi and γi are of

dimensions ki×1 and ni×1

correspondingly. Vertically stacking

the Observations corresponding to

the ith equation, we can write each

equation in vector form as:

yi = Y−1,tγi + Xitβi + uit , i=1,.......,m,

where γiand ui are T×1 vectors, Xi is a

T × kI matrix of exogenous regressors,

and Y-i is a T × nI matrix of

endogenous regressor on the right-hand

side of the ith equation. Finally, we can

move all endogenous variables to the

left-hand side and write

the m equations jointly in vector form

YΓ = XB + U

This representation is known as

the structural form. In this

equation Y =[y1 y2 ... ym] is the T × m

matrix of dependent variables. Each of

the matrices y−i

is in fact an ni

-

columned sub matrix of this Y.

The m×m matrix Γ, which describes the

relation between the dependent

variables, has a complicated structure.

It has ones on the diagonal, and all

other elements of each column i are

either the components of the vector -

γi or zeros, depending on which

columns of Y were included in the

matrix Y−i. The T×k matrix X contains

all exogenous repressor from all

equations, but without repetitions (that

is, matrix X should be of full rank).

Thus, each Xi is a ki

-columned sub

matrix of X. Matrix Β has size k×m,

and each of its columns consists of the

components of vectors βi and zeros,

depending on which of the regressor

from X were included or excluded

Page 3 of 11

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 307

from Xi. Finally = [u1 u2 ... um] is

a T×m matrix of the error terms.

Post multiplying the structural equation

by Γ −1, the system can be written in

the reduced form as

his is already a simple general linear

model, and it can be estimated for

example by ordinary least squares.

Unfortunately, the task of decomposing

the estimated matrix into the

individual factors Β and Γ −1 is quite

complicated, and therefore the reduced

form is more suitable for prediction but

not inference

2.3.1 Assumptions

Firstly, the rank of the matrix X of

exogenous regressor must be equal to k,

both in finite samples and in the limit

as T → ∞ (this later requirement means

that in the limit the

expression should converge to a

no degenerate k × k matrix).

Matrix Γ is also assumed to be non- degenerate.

Secondly, error terms are assumed to be

serially independent and identically

distributed. That is, if the tth row of

matrix U is denoted by u(t), then the

sequence of vectors {u(t)} should be

iid, with zero mean and some

covariance matrix Σ (which is

unknown). In particular, this implies

that:

E[U] = 0, E[U′U] = T Σ.

Lastly, identification conditions require

that the number of unknowns in this

system of equations should not exceed

the number of equations. More

specifically, the order

condition requires that for each

equation ki + ni ≤ k, which can be

phrased as “the number of excluded

exogenous variables is greater or equal

to the number of included endogenous

variables”. The rank condition of

identifiability is that rank(Πi0) = ni

where Πi0 is a (k − ki

)×ni matrix which

is obtained from Π by crossing out

those columns which correspond to the

excluded endogenous variables, and

those rows which correspond to the

included exogenous variables.

2.3.2 Estimations

(1)Two-stages least squares (2SLS)

The simplest and the most

common estimation method for the

simultaneous equations model is the so- called two-stage least squares method,

developed independently by Theil

and Basmann (1957). It is an equation- by-equation technique, where the

endogenous regresses on the right-hand

side of each equation are being

instrumented with the regresses X from

all other equations. The method is

called “two-stage” because it conducts

estimation in two steps.

Step 1: Regress Y−i on X and obtain

the predicted values

Step 2: Estimate yi

, βi by the ordinary

least squares regression

of yi on and Xi. If the ith equation

in the model is written as

yi = (Y−1 Xi) (

γi

βi) + ui ≡ Zi δi+ui

where Zi

is a T×( nI × kI

) matrix of both

endogenous and exogenous regressors

in the ith equation, and δi is an (nI ×

kI

)-dimensional vector of regression

Y = X\Beta\Gamma^{-1} + U\Gamma^{-1} = X\Pi + V.\,