Page 1 of 9

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 296

A review on wind energy: policy, application, technologies & its

thermal performance with economical consideration

1Harish Kumar Patel, 2Vishnu Nayak,

3Ghanshyam Chouhan,

4Satish Vishwakarma

1

Lecturer & HOD Mechanical Department, Government Polytechnic Jashpur(c.g.)

23,4Department of Mechanical Engg. (Diploma), Government Polytechnic Jashpur(c.g.)

E-Mail- harish.patelhydra@gmail.com ; E-mail-7587787689@gmail.com ; E-mail-gchouhan56@gmail.com

E-mail- sv0910747@gmail.com

ABSTRACT

This paper comprises various technique and

technologies for wind power generation its

economic background to calculate its

effectiveness with Cost comparison with

other generation technologies and estimate

its External cost, Eternal costs evaluation of

conventional and renewable systems. Its

applicability in on shore and off shore

condition. Its design variables on blades

turbine and other components are also

discussed here. In this policy we try to

cover various aspects of policy govern by

various countries of Europe, Asia, and

America and other continents. We also

reviewed the possibility to reduce its cost to

make better supplement of energy in

incoming days.

Key words: - wind power, economy, policy,

cost effectiveness

1. INTRODUCTION

Energy is available in two different

alternatives, non-renewable (coal, fuel,

natural gas) and renewable (solar, wind,

hydro, wave) sources. Especially, after the

industrial revolution, in the 19th century,

first coal and then fuel oil are used as

primary energy sources for the needs of

modern communities. As known fossil fuels

have limited potential and at current rates of

exploitation they are expected to deplete

within the next centuries. This is one of the

reasons why clean, sustainable and

environmentally friendly alternative energy

resources are currently sought. The

accumulation of carbon dioxide in the lower

layers of the atmosphere gives way to

climate change, floods, intensive rainfalls

and droughts. In order to reduce these

dangerous effects, it is the responsibility of

each country to improve the quality of the

energy resources, and if possible, to replace

fossil fuels (coal and oil) with renewable

alternatives wind, solar and other energy

sources.

2. Economic consideration of

wind energy

Generating electricity from the wind makes

economic as well as environmental senses.

Producing and selling electricity from the

wind is no different from any other

businesses. To be economically viable, the

cost of making the electricity has to be less

than its selling price. In every country, the

price of electricity depends not only on the

cost of generation, but also on many

different factors that affect the market, such

as energy subsidies and taxes. Generally, the

cost of generating electricity is made up

from,

2.1 Various cost effecting its economy

 Capital cost—building the

power plant and connecting it to the

grid.

Page 2 of 9

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 297

 Running costs—operating, fuelling,

and maintaining the plant, and finally.

 Financing—the cost of repaying

investors and banks. For wind

turbines, there are no fuel costs, as the

wind is free. Once the project has

been paid for, the only ongoing

expenses are for operation and

maintenance. The capital cost is

between 75 and 90% of the total. As

the market has grown, wind power

has shown a dramatic fall in cost. The

production cost of a kilowatt hour

(kWh) of wind power is one fifth of

what it was 20 years ago.

Over the past 5 years alone, costs have

reduced by some 20%. Wind is already

competitive with new coal-fired plants and

in some locations it can challenge gas,

currently the cheapest option. Wind energy

production continues to improve in ways,

which reduce cost and improve efficiency.

Wind energy projects are simple and cheap

to maintain.

2.2 COST COMPARISON

2.2.1 Cost comparison with other

generation technologies: how do the

costs of wind energy compare with

other generating technologies already in

widespread use? At current electricity

prices, the cheapest wind plant, those

with easy access and economies of

scale are now fully competitive with

gas, if sites have an average good wind

speed of 7.5 m/s. The price of

electricity from new thermal plant is

based on European data, and has

changed little since 2001 with gas on an

upward price trend. The costs of

nuclear do not account for public sector

liability, waste and decommissioning

issues. One other factor should also be

taken into account in these

comparisons. The lower capacity factor

of wind power means that to produce a

given quantity of electricity, it is

necessary to install 2–2.5 times more

generating capacity than with fossil fuel

plants. This tends to make wind energy

more expensive in the initial phase of

the life cycle.

On the other hand, there is no

fuel cost during the lifetime of a wind

power generating plant. Producing

electricity from the wind is a new

industry and 15 years ago there was no

commercial wind power in Asia. In

some countries, wind energy is already

competitive with fossil and nuclear

power even without accounting for the

environmental benefits of wind power.

The cost of electricity from

conventional power stations does not

usually take full account of its

environmental impact (acid rain, oil

slick clean up, the effects of climate

change, etc.). As its economic attraction

has increased, wind energy has become

a big business.

2.2.2 External cost : To determine the

true cost of generating electricity, the cost of

pollution and other ‘external costs’ should

be included in the calculations. External

costs are the costs to human health and the

environment, which are not reflected in the

price of the electricity. They are also

referred to as ‘social costs’. Society bears

the cost of pollution in terms of poorer

health, leading to higher health service costs

funded by the tax payer, and a degraded

environment, which increases the cost of

food and farm products. As yet, no

universally accepted method has been found

to put a price on these costs. The external

costs of producing power by conventional

means—such as air pollution, long-term

damage to health, and oil spillage clean-

Page 3 of 9

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 298

up—are not generally included in

calculations of electricity costs. When cost

comparisons are made on this basis, wind

energy produces cheaper electricity than

new coal and nuclear power plants. Other

examples of the external costs of burning

coal include occupational health problems

from mining, and the damage caused to

buildings, agriculture, fisheries, and

ecosystems from acid rain. Furthermore, the

external costs of climate change will be

enormous. It is very difficult to calculate the

costs of environmental and other categories

of damage.

El-Kordy et al. Analyzed the external

cost of emissions from different generating

systems. A proposed large-scale

photovoltaic (PV) plant of 3.3 MW and a

wind farm 11.25 MW grid connected at

different sites were investigated. A life cycle

cost (LCC) analysis for each system was

performed using the present value criterion.

Their comparison results showed that wind

energy generation has the lowest cost. For

conventional electricity generation, a

combined cycle natural gas-fired system has

the lowest cost per kWh, which is nearly

compatible to wind energy costs without

considering any external costs.

Hohmeyer et al. The external costs

are the costs of the impact caused to the

environment due to the pollutants emitted

from the specified technology. It is expected

that the environmental impacts and damages

will be approximately proportional to the

emissions produced by electricity

generation. The significant contributors

from fossil fuels to these damages are sulfur

oxides (SOx); nitrogen oxides (NOx), total

suspended particulate (TSP) and carbon

dioxide (CO2). The determination of

external costs due to these emissions is

necessary in order to specify the cost of each

kWh and compare it with the cost of each

kWh from RE systems (wind and PV).

2.2.3 External costs evaluation of

conventional systems: the externality

values of two oil-fired technologies (steam

and gas turbines), and three natural gas-fired

technologies (steam, gas turbine and

combined cycle) are predicted. The results

are considered without the use of pollution

control equipment. The external cost per

generated energy ($/kWh) for each plant is

the value of the external cost per unit energy

input multiplied by the heat rate of each

plant. The external cost per delivered energy

($/kWh) is calculated assuming 15%

marginal energy losses. The results show

that externalities of oil-fired systems are

affected by sulfur contents and particulate

emissions. Heat rate is also considered as the

main factor in determining externalities of

the different generation systems.

2.2.4 Electric power systems: Various

technologies are currently available

candidates for expanding electrical

generating systems. The most common

generating technologies, other than

conventional, are solar (PV and solar

thermal) and wind energy converters

(WECS). There are several reasons to use

LCC analysis rather than simply to compare

the initial cost of each supply option. Capital

cost (equipment and installation expenses) is

one of many cost components. Power

systems also require varying amounts of

maintenance, repair, and fuel costs. The

external costs due to environmental

consequences also differ greatly especially

when comparing conventional and

renewable systems. As an example, wind

power system may have a higher initial cost

than gas turbines, but it requires no fuel, and