Page 1 of 10

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 205

Geothermal Energy: Renewable and Sustainable Economy with

Legal Frameworks & Direct Application of Its Energy for

Electricity Generation-An overview

1Harish Kumar Patel, 2Ashish Kumar Singh,

3Gagankant Sahu,

4Anil Kumar

1

Lecturer & HOD Mechanical Department, Government Polytechnic Jashpur(c.g.)

2 ,3,4Department of Mechanical Engg. (Diploma), Government Polytechnic Jashpur(c.g.)

E-Mail- harish.patelhydra@gmail.com E-mail-anup.1194.98@gmail.com

E-mail-gagankantsahu@gmail.com E-mail- ak1132898@gmail.com

ABSTRACT

This paper presents a review of the

geothermal energy for direct utilization; we

also collect data from at World Geothermal.

We go through the history and different

aspects presented by various authors and

evaluate the various installed geothermal

projects and its capacity with environmental

aspects its application and economical

consideration.

Key-word: - geothermal energy, economy,

Renewable energy

1. INTRODUCTION

Geothermal energy is thermal

energy generated and stored in the Earth.

Thermal energy is the energy that determines

the temperature of matter. The geothermal

energy of the Earth's crust originates from the

original formation of the planet (20%) and

from radioactive decay of minerals

(80%). The geothermal gradient, which is the

difference in temperature amongst the core of

the planet and its surface, motivate a

unceasing conduction of thermal energy in the

form of heat from the core to the surface. At

the core of the Earth, thermal energy is created

by radioactive decay and temperatures may

reach over 5000 °C (9,000 °F). Heat flows on

or after the core to surrounding cooler rock.

The high temperature and pressure cause some

rock to melt, creating magma convection

upward since it is lighter than the solid rock.

The magma heats rock and water in the crust,

sometimes up to 370 °C (700 °F).

From hot springs, geothermal energy has been

used for bathing since Paleolithic times and

for space heating since ancient Roman times,

but it is now better known for electricity

generation. Worldwide, about

10,715 megawatts (MW) of geothermal power

is operational in 24 countries. An additional

28 giga watts of direct geothermal

heating ability is installed for district heating,

space heating, industrial processes,

detoxification and agricultural applications.

Page 2 of 10

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 206

2. History

Hot springs used for showering at least

since Paleolithic eras The oldest known spa is

a stone pool on China’s Lisan mountain built

in the Qin dynasty in the 3rd century BC, at

the same site where the Huaqing Chi palace

was later built. In the first century AD,

Romans conquered Aquae Sulis, now Bath,

Somerset, England, and used the hot springs

there to feed public baths and underfloor

heating. The admission fees for these baths

probably represent the first commercial use of

Figure 1: The Ring of Fire

Geothermal power. The world's oldest

geothermal district heating system

in Chaudes-Aigues, France, has been

functioning since the 14th century. The initial

industrial treatment began in 1827 with the

use of geyser steam to remove boric acid from

volcanic in Larderello, Italy.

In 1892, America's first district heating

system in Boise, Idaho was powered directly

by geothermal energy, and was copied

in Klamath Falls, Oregon in 1900. A deep

geothermal well was used to heat greenhouses

in Boise in 1926, and geysers were used to

heat greenhouses in Iceland and Tuscany at

about the same time. Charlie Lieb developed

the first down whole heat exchanger in 1930

to warmth his community. Steam and hot

water after geysers began space heating homes

in Iceland starting in 1943.

Worldwide geothermal electric capability,

Upper red line is installed capacity; lower

green line is comprehended production in the

20th century, demand for electricity led to the

deliberation of geothermal power as a

generating source. Prince Piero Ginori

Conti tested the first geothermal power

generator on 4 July 1904, at the same

Larderello dry steam field where geothermal

acid extraction began. It successfully lit four

Fig 2: production of geothermal over years

Light bulbs. Later, in 1911, the world's first

profitable geothermal power plant was erected

there. It was the world's only industrial

http://upload.wikimedia.org/wikipedia/commons/thumb/c/ce/Geothermal_capacity.svg/220px-Geothermal_capacity.svg.png

Page 3 of 10

Journal for Studies in Management and Planning

Available at http://internationaljournalofresearch.org/index.php/JSMaP

e-ISSN: 2395-0463

Volume 01 Issue 04

May 2015

Available online: http://internationaljournalofresearch.org/ P a g e | 207

manufacturer of geothermal electricity until

New Zealand built a plant in 1958.

Lord Kelvin invented the heat pump in 1852,

and Heinrich Zoelly had patented the idea of

using it to draw heat from the ground in 1912.

But it was not until the late 1940s that the

geothermal heat pump was magnificently

employed. The earliest one was possibly

Robert C. Webber's home-made 2.2 kW

direct-exchange systems, but sources disagree

as to the exact timeline of his invention. J.

Donald Kroeker designed the first commercial

geothermal heat pump to heat

the Commonwealth Building (Portland,

Oregon) and demonstrated it in 1946.

Professor Carl Nielsen of Ohio State

University built the first residential open loop

version in his home-based in 1948. The

technology became popular in Sweden as a

result of the 1973 oil crisis, and has been

growing slowly in worldwide acceptance since

then. The 1979 development

of polybutylene pipe greatly augmented the

heat pump’s economic viability.

[

In 1960, Pacific Gas and Electric began

operation of the first successful geothermal

electric power plant in the United States at

The Geysers in California. The original

turbine lasted for more than 30 years and

produced 11 MW net power.

The binary cycle power plant was first

demonstrated in 1967 in the U.S.S.R. and later

introduced to the U.S. in 1981.[18] This

technology allows the generation of electricity

from much lower temperature resources than

previously. In 2006, a binary cycle plant

in Chena Hot Springs, Alaska, came on-line,

producing electricity from a record low fluid

temperature of 57 °C (135 °F).

3. Electricity Generation By

Geothermal Energy

The International Geothermal Association

(IGA) has reported that

10,715 megawatts (MW) of geothermal power

in 24 countries is online, which is expected to

generate 67,246 GWh of electricity in

2010. This represents a 20% increase in online

capacity since 2005. IGA projects growth to

18,500 MW by 2015, due to the projects

presently under consideration, often in areas

previously assumed to have little exploitable

resource.

In 2010, the United States led the world in

geothermal electricity production with 3,086

MW of installed capacity from 77 power

plants. The largest group of

geothermal power plants in the world is

located at The Geysers, a geothermal field

in California. The Philippines is the second

highest producer, with 1,904 MW of capacity

online. Geothermal power makes up

approximately 27% of Philippine electricity

generation.

Installed geothermal electric capacity

Country

Capacity

(MW)

2007[12]

Capacity

(MW)

2010[24]

Percentage

of national

production