Page 1 of 18
Journal for Studies in Management and Planning
Available at http://internationaljournalofresearch.org/index.php/JSMaP
e-ISSN: 2395-0463
Volume 01 Issue 09
October 2015
Available online: http://internationaljournalofresearch.org / P a g e | 109
Strategic planning in the development of cement industry
Amir Noorbakhsh
Islamic Azad University South Tehran Branch, Tehran, Iran
Gelareh Nazeri
Amir Kabir University, Tehran, Iran
Seyed Ali Nourbakhsh
University of Tehran, Tehran, Iran
ABSTRACT
Purpose - The main purpose of this study is developing an appropriate and coherent
objectives and strategies for the development and the production of the cement industry.
Design/methodology/approach - This research is focused on the significant trends that surely
effect on the economic structure of the cement industry. In this regards, subjects such as the
available technology, the rehabilitation, the management, the manpower resources and the
decision making process have studied. In fact the cement industry plays a very important role
in the economic and the social development. Therefore determining the appropriate strategic
for cement industries is also so important.
Findings - In this study, a model which generates the strategies has been developed for the
cement industry. It is also applicable for every sector of industries. The main problems in this
planning which should to be paid attention are the role of each cement plants as an element
and the role of factories generally. After developing the strategies, a list of operational plan
is generated for each strategy.
Originality/value - Development can not be achieved outside the scope of planning, so new
methods and strategies should adopted for managers. The originality of this article is to study
and develop the goals and strategies of the cement industry.
Keywords - Strategic planning, The cement industry, Aims of the cement industry
Paper type – Research paper
1. Introduction:
According to national and regional crises that have occurred during recent years, the
necessity of government intervention and the use of national support have been realized to the
form of macro programming. Development is achieved only in the context of planning, so
this study adopts ways that managers have what program and what are their strategies, to
present the more awareness as far as possible. The strategic plan is a response to the long- term effective planning and implementation of the strategies. Unlike conventional methods,
this kind of planning In addition to internal factors has considered external factors and
environmental deals. Therefore, it can be a tool to determine the future activities. Changes of
environmental conditions is including such as the oil crisis, economic and social changes,
political and so on.
Programs with strategic thinking designed for the final profit organizations and authors who
presented a model of strategic planning focus on a company individually. Those companies,
in formulating and evaluating strategic plans within available resources, strengths and
weaknesses and environmental factors have led to the development of the company in
connection with the planning branch of industry is not paying enough attention. Strategic
planning is organized effort and systematic to make fundamental decisions and basic actions
Page 2 of 18
Journal for Studies in Management and Planning
Available at http://internationaljournalofresearch.org/index.php/JSMaP
e-ISSN: 2395-0463
Volume 01 Issue 09
October 2015
Available online: http://internationaljournalofresearch.org / P a g e | 110
that these form the company and the interactions of an organization with other institutions in
the legal framework (Plan and Budget Organization,1999 and E. Lawrence, 1999). A
strategic plan has seven identified elements (Iran Data Processing Company, 1997 and
George A. et. al. 1999):
1. The mission of the organization (determining what?)
2. The strategic Analysis (determining why?)
3. The strategy (determining to which direction?)
4. The long-term goals (defining when and how?)
5. The Integrated programs (determining when and how?)
6. The financial forecasts (determining the estimated financial the above elements)
7. The executive Summary (determining the above elements)
Production is the most important element of any economic system. In other words, the
production functions form the contents of each economic system. Thus, first of all it is
necessary to investigate the production element of the system for measuring the accuracy of
the economic system. Because the production of useful goods or services in addition to the
above-mentioned vehicles and equipment require planning as well (P. Forbes, 1999).
In this study is that with the support and experience of existing, well-organized and organized
efforts to help the cement industry professionals to take decisions and measures taken
fundamental, presents a picture of the country's cement industry to identify new strategies
and helps the industry in identifying strengths and weaknesses and the opportunities and
threats. In this research, the performances in key areas such as production, consumption,
foreign trade, and other economic indicators were evaluated on the basis of its analysis of the
factors could be identified. Therefore, this paper presents a clear picture of the problems and
bottlenecks in the cement industry.
The overall purpose of this research is developing an appropriate and coherent objectives and
strategies for the development of the cement industry. So the lack of strategies corresponding
to the new environment of plants can develop major problems in the cement industry and
makes its development risky. Development can not be achieved outside the scope of
planning, so new methods and strategies should adopted for managers. The aim of this article
is to study and develop the goals and strategies of the industry.
2. Research methodology
In this study informations about the production and consumption of cement in the world and
the raw materials used in cement production and how cement has produced from it have
presented using books, magazines and websites, and then, the performance of the cement
industry (past and present performance of key variables such as production, consumption,
foreign trade, exchange and Price) will be evaluated using the information of both the cement
and its process and the planning and strategic management, and some problems, limitations
and strengths and weaknesses of the industry will be found using the current situation. New
strategies of the industry will be to identified using proposed methodology, and opportunities
and threats that the cement industry has faced will be determined. Finally, the results of this
study in terms of concepts, the evaluation of the views of experts in the cement industry,
understanding of the internal and the external industry environment, followed by the
statistical analysis and the proposed methodology and the proposed strategy will be discussed
extensively.
Page 3 of 18
Journal for Studies in Management and Planning
Available at http://internationaljournalofresearch.org/index.php/JSMaP
e-ISSN: 2395-0463
Volume 01 Issue 09
October 2015
Available online: http://internationaljournalofresearch.org / P a g e | 111
3. The mission of cement industry:
The missions and purposes of the cement industry explain the concept of this industry. The
mission of an industry must have the following characteristics (Hamidizadeh, MR., 2002;
Sheikh Abu Masood, A., 2003 and Shani, M., 2004):
• Long-term
• Permanent
• Should be a result of shared values and beliefs.
• Should not be only a quantitative mission, but should also be have a qualitative value.
• should not be limited to the industery itself, but also should have a consideration for the
fields outside that specific industry.
• should have been defined specifically for that industry.
Therefore, taking into consideration the genral purposes of the industry and identifying the
internal and external factors, one can suggest the following missions and objectives for the
cement industry:
3.1. Mission:
To provide different types of cement with high quality and low prices for different sectors of
society.
3.2. Objectives:
• Expansion of geographical coverage and access to new markets
• Guidance and support for the development of international markets and export
• Improving the quantity and quality of products
• Achieving self-sufficiency in the field of technology and ability to produce efficintly
and economically
• Promoting suitable consumer culture
4. Aims of the cement industry:
Although the missions and purposes of the cement industry explain the concept of this
industry, considering the analyses performed for identifying the inner and outer environments
of the industry, the following basic aims can be suggested. The aims are set in such a
hierarchy that one can start with the missions and move on to the qualitative objectives and
determine the course of action. Afterwards, one can tend to define the quantitative objectives
and determine the extent of the progress (Aria Nezhad et. al., 1992).
In this section, in order to define each one of the quality objectives the following factors
are recommended. Considering the objectives and basic goals mentioned above one can
present a collection of qualitative goals in factories and industry, which is presented in tables
1 and 2.
Table 1. lists of the goals of quality (factory)
Table 2. lists of the goals of quality (industry)
The strategic outcomes that the mission and the aims of the institution should yield are
investigated. These results reflect the desires and expectations of the industry in its different
