Page 1 of 20
Journal for Studies in Management and Planning
Available at http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 2
February 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ Page | 1
A risk-factor-based analytical approach for integrating occupational
health and safety into workplace risk management
Ahmed Abou Elmaati1
, Gihan Hosny1* Gehan Raafat3
1-2Division of Environmental Health, Department of Environmental Studies, Institute of Graduate Studies and
Research, University of Alexandria, P.O.Box 832, Alexandria, Egypt.
3Department of Occupational Health, High Institute of Public Health, University of Alexandria,
Alexandria Egypt.
Email: gihan_hosny@yahoo.com;
Abstract
The chief goal of an occupational health and safety program, OHS, in a facility is to prevent
occupational injury and illness by anticipating, recognizing, evaluating, and controlling
occupational health and safety hazards. The underlying study presented a systematic approach
for the evaluation of OHS risks and proposed a new procedure based on the number of risk
factors identified and their relative significance in an Electrical Power Station, Alexandria,
Egypt. Qualitative and quantitative risk assessment was utilized as a systematic approach. A
risk factor concentration along with weighting of risk factor categories as contributors to
undesirable events of different hazards were used in the analytical hierarchy process multi- criteria comparison model. A case study is used to illustrate the various steps of the risk
evaluation approach and the quick and simple integration of OHS at an early stage of a project.
The approach allows continual reassessment of criteria over the course of the project or when
new data are acquired. It was thus possible to differentiate the OHS risks from the risk of drop
in quality over the different project activities. This approach provide a convenient method for
managing and planning for control of different workplace risk.
Key words; Occupational health & safety; qualitative and quantitative risk analysis; Physical
hazards; risk assessment.
1. Introduction
Excluding occupational health and safety (OHS) from project management is no longer
acceptable. Numerous industrial accidents have exposed the ineffectiveness of conventional risk
evaluation methods as well as negligence of risk factors having major impact on the health and
safety of workers and nearby residents. Lack of reliable and complete evaluations from the
beginning of a project generates bad decisions that could end up threatening the very existence
Page 2 of 20
Journal for Studies in Management and Planning
Available at http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 2
February 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ Page | 2
of an organization. Industrial accidents continue to cause human suffering, capital losses,
environmental destruction and social problems (Duijm et al., 2008). In recent years, accidents in
construction and industry have occurred in spite of rigorous management of projects and robust
occupational health and safety (OHS) management systems in all phases of project lifecycle
(Makin & Winder, 2008). The explosion of a power plant in the start-up phase while testing a
gas line in a populated region (43,000 inhabitants) of Connecticut (USA) on February 7, 2010
was reminiscent of a series of similar industrial accidents over the decades in terms of gravity
and consequences (Li et al., 2009). In most cases, investigation into causes of accidents revealed
failure in identification and evaluation of impending risks. In general, risk is evaluated in terms
of its consequences with respect to project performance and rarely in terms of human suffering.
Smallwood, 2004, confirmed that quality, planning and costs are the parameters given the
greatest consideration (Smallwood, 2004).
Industrial work is risky in many economic sectors, in particular the construction industry
(Smallwood, 2004, Fung et al., 2010), chemical plants (Vemero & Montanari, 2010), nuclear
power plants (Young, 2005) and the mining industry (Hermanus, 2007). Safety and health
problems can result from any of several groups of causes, which disparity from one industry to
another. The high level of risk in the construction industry is explained by the nature and
characteristics of building work, low educational level of workers, lack of safety culture and
communication problems (Smallwood, 2004, Fung et al., 2010). In the mining sector, increasing
numbers of subcontractors working in mines, the emergence of new mining ventures and
recognition of small-scale mining pose new confrontation to the practice of risk control
(Hermanus, 2007). The most effective way to improve OHS performance is to identify and
eliminate hazards at the source (Glickman & white, 2007). Risk identification and assessment
thus become primary tasks that are part of hazard prevention. Risk analysis is the foundation of
the risk management process and presents several challenges (Liu & Gu., 2009, Hagigi &
Sivakumar, 2009). OHS has not always been a preoccupation of process engineers. Incentives
for integrating OHS risk management into engineering have been discussed recently. These
include enactment, awareness of the importance of protecting workers and in some cases
tangible potential to increase profitability and remain competitive (Hassim & Hurme, 20l0,
Zachartassen & Knuis, 2002, Sonnemans et al., 2002).
Page 3 of 20
Journal for Studies in Management and Planning
Available at http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 2
February 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ Page | 3
Health, Safety and Environment (HSE) is a management responsibility which follows the
company’s line organization in divisions and projects. It will be run in such a way that health
and safety are promoted for all employees, a safe and helpful working environment is provided,
and the environment and property are protected (Hassim & Hurme, 20l0, Hernandez et al.,
2010).
Because of the importance of applying rules targeting better achievement of health and
safety, the present study will focus on evaluating HSE, as will be described in Sidi Krir Power
Station that is located on the Mediterranean cost at distance about 29 km west of Alexandria.
The company started its activity in 1999 by steam plant. It consists of two units; the capacity of
each is 320 MW. It represents the most important company in producing electrical power in
Alexandria. The company is operated by 1200 workers. The aim of the underlying study is to
present a new systematic approach for the evaluation of OHS risks and proposes a new
procedure based on the number of risk factors identified and their relative significance in Sidi
Krir Power Station. 2. MATERIALS AND METHODS
The underlying study has been performed in Sidi Krir Power Station to examine the
application of a systematic approach for evaluation of OHS risks and propose a procedure for
calculation of risk factors to identify their relative significance, through the following general
tools:
2.1. Study design and local ethical approval;
2.2. Risk identification and qualitative risk assessment;
2.3. Quantitative risk assessment;
2.3.1. Accident analysis
2.3.2. Measurement of time weighted average of physical hazards
2.4. Characterization of the assessed risks and evaluation of their probability and severity to
calculate the probable risk factors for the measured physical hazards in order to evaluate
the level of practicability of each risk.
