Page 1 of 22
Journal for Studies in Management and Planning
Available at
http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 8
August 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 350
Econometric Competencies and Entrepreneurship Development: A
Demonstrative Case Study of Small Scale Agro-Business Labour
Saving Machines Fabricating Firm in Nigeria.
Adebayo G Adebayo
Department of Accountancy Rufus Giwa (Formally Ondo State) Polytechnic.
Owo, Ondo State, Nigeria
E-mail: adebayoga2016@gmail.com
Abstract
This study is designed specifically to
demonstrate the application of econometrics
or quantitative analysis especially in helping
the numerous small and medium enterprises
in Nigeria in critical decision making. An
Agro-business labour saving fabricating
firm in Nigeria was selected as a case and
pilot study for all other small or medium
enterprises fabricates labour saving
machines such as the cassava frying
machine (CFM) and palm-oil extracting
machine (PEM). The agro-business firm
also fabricate cassava grater (GRT) and
appliances (APP). The entrepreneur is
worried on some critical problems. First,
whether these special offers would affect the
sale of the major products CFM and PEM
since the same customers buy the major
products and the special offers. This implies
that money spent on special offers will not
be spent on CFM and/or PEM. An increase
in the sales of special orders may
correspond to a decrease in the sale of CFM
and PEM. Second is what would be the total
sales taking into consideration especially
the seasonal fluctuations and third how to
identify existing customers who are most
likely to respond to proposed improved offer
on CFM and PEM. This is important as the
Firm fabricates these products on demand.
Three models were designed to find solution
to each of the problems. The first model was
the two-stage least square regression.
Findings revealed that the special offer sales
GRATER and APPLIANCES) had no
negative effect on the sales of the major
products (CDM and PEM). All the products
significantly contributed to the total sales.
The second model was forecasting. The
model satisfied forecasting requirements
and was able to forecast total sales from
April to December 2016 taking into
consideration seasonal variations referred
to as fluctuations. The third model is the
recency, frequency and monetary (RFM)
analysis. This marketing tool is used to
classify customers according to how recent
they patronize, how often and how much is
involved in individual customer’s cumulative
patronage. The RFM analysis carried out on
the customers identified the firm’s customers
that would likely respond to new offer. An
RFM score of 300 and above qualified a
customer to be selected. Part of the
recommendations was that entrepreneurs
should avail themselves of the decision
making tools for better management of their
enterprises.
Keywords: Econometric Competence, RFM
Analysis, Two-Stage Least Squares
Regression, Forecasting
1. Introduction
The world is facing many economic
challenges and issues. These do not isolate
the developed economies. Both are debt
ridden, with regional economic imbalances
and geo-political challenges. There is
Page 2 of 22
Journal for Studies in Management and Planning
Available at
http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 8
August 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 351
general economic meltdown in the world
market. The Nigeria economy has been
acutely affected because of the fall in the
price of crude oil in the world market as a
result of these economic imbalances and
trade policies that are not conducive to
Nigerian oil market. Since revenue from
crude oil takes about 90% of the Federal
government total revenue, there is the
critical need to raise non-oil revenue to
ensure fiscal sustainability while
maintaining infrastructure and social
spending.
The Federal government has taken a bold
step towards revamping agriculture and
overhauling its solid mineral resources.
From an entrepreneurial perspective, the
present economic meltdown in Nigeria
would eventually be a blessing in disguise.
The Central Bank of Nigeria has been
instructed by President Buhari to create a
“synergy" and organize soft loans to agro- based industries and other export businesses.
The main objectives of the 2016 Buhari
government's budget are to make the
"synergy" work among all the different
players in the country's economy. These
include the banking system, financial
institutions, government entities, regulators
and other arms of the government.
1.1 Entrepreneurial Development.
The credibility of the Buhari government
among the Nigerian populace as a result of
his zero tolerance to corruption and his "Big
Bang" [a rapid reform which is
economically necessary as a result of severe
macroeconomic imbalances (Gelb, Jefferson
and Singh 1993) such as this period of
economic crisis in Nigeria] approach to
major economic reforms, has spurred many
investors into agro-based industries. They
believe that the government meant business.
One of these respondents is a medium scale
firm in Nigeria that fabricates machines to
boost agricultural produce. The Firm has
recently reactivated two of its machines-the
Cassava Frying Machine (CFM) and the
Automated Palm oil Extracting Machine
(PEM)
1.2 Objectives of the Firm
The major objectives of the Firm in
fabricating these labour saving machines is
the issue of health hazard on the one hand.
Many local manual cassava frying and palm
oil producers especially women, had been
subjected to untimely death due to incessant
heat from the local frying system and the
palm oil production. These machines would
reduce drastically the feminine life wasted
on daily basis. On the other hand, these
machines will boost agricultural produce of
"GARI"(a local name for the fine grain
Page 3 of 22
Journal for Studies in Management and Planning
Available at
http://edupediapublications.org/journals/index.php/JSMaP/
e-ISSN: 2395-0463
Volume 02 Issue 8
August 2016
Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 352
output from the frying process of cassava)
and palm oil to contribute to increase the
recent low GDP rate in Nigeria. [Economic
growth in the last quarter of 2015 was 2.1%
while total growth in the year was 2.8%, the
slowest since 1999 to date (NBS, 2016).
This statistics seems to toe the line of the
global GDP growth projection of 2.5%
which is 0.3% point less than November
2015 outlook (GEO, 2016)]. Therefore any
entrepreneurial effort to boost the Nigerian
GDP at this trying period is a right decision
in the right direction.
1.3 The Cassava Frying Machine
The CFM is powered by electricity and is
capable of frying about 5-10-kg of already
peeled, washed and had been cut into
smaller sizes and loaded into the machine
drum. The machine grinds the cassava,
presses it cause fermentation and fry the
cassava into very fine grains. Adjustments
by the use of some special appliances sold
by the firm to its customers may cause the
machine to dry cassava from the normal
"GARI" into smoother form or into powder.
It is an automated machine with 100% local
components. A single CFM costs N45, 000
($225)
1.4 The Automatic Palm oil Extracting
Machine..
The PEM is an automated machine that
produces fine, clear, well heated palm oil.
Palm fruits are removed from the bunch
after some period for partial fermentation,
washed and then loaded into the machine
tank or drum to the brim. The machine
twists and separate kernels from tissues,
extract the paste and heat into fine glossy
oil. The slag is released from an outlet. It is
also powered by electricity. The machine is
made with 90% local components, that is,
10% components have to be imported. A
single machine costs N50, 000 ($250), about
N5000 ($25) more than CFM probably as a
result of the cost of the imported
components.
1.5 Statement of the Problem.
The two machines fabricated by the firm are
the Cassava Frying Machine (CFM) and
Palm oil Extracting (PEM) and are sold to
customers on demand. Apart from these
machines, there are two special offers that
are also sold. These are grater (GRT) and
appliances (APP). The APP is a device to
enhance either the CFM or PEM, especially
as a power saving device, at the customers'
option and is sold at the rate of N12, 000 per
unit. These appliances are capable of
making adjustments possible to CFM and
PEM and other agro-based machines. The
GRT powered by electricity, the pealed, and
