Page 1 of 9

Journal for Studies in Management and Planning

Available at

http://edupediapublications.org/journals/index.php/JSMaP/

e-ISSN: 2395-0463

Volume 02 Issue 12

December 2016

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 14

Deep Blind Evaluation of the Quality of the Use of

Graphic Form Analysis

1mutakana Viswanatha Reddy,2Mrs.G.Satya Prabha

1PG Scholar, Department of ECE, SLC's Institute of Engineering and Technology, Piglipur Village, Hayathnagar

Mandal, Near Ramoji Film City, Ranga Reddy District, Hyderabad, Telangana

2Assistant Professor, Department of ECE, SLC's Institute of Engineering and Technology, Piglipur Village, Hayathnagar Mandal,

Near Ramoji Film City, Ranga Reddy District, Hyderabad, Telangana

Abstract Multiview videos plus depth

(MVD) is a popular 3D video representation

where pixel depth information is exploited to

generate additional views to provide 3D

experience. Quality assessment of MVD data

is of paramount importance since the latest

research results show that existing 2D

quality metrics are not suitable for MVD.

This paper focuses on depth quality

assessment and presents a novel algorithm

to estimate the distortion in depth videos

induced by compression. The proposed

algorithm is noreference and does not

require any prior training or modeling. The

proposed method is based solely on the

statistical analysis of the compression

sensitive pixels of depth images. The

experimental results worked out on a

standard MVD dataset show that the

proposed algorithm exhibits a very high

correlation with conventional full-reference

metrics.

1. INTRODUCTION

Multiview-video-plus-depth format for 3D

content representation has been adopted for

current and future 3D television

technologies e.g. free-viewpoint television

(FTV) and Super Multiview (SMV)

displays. The gray scale depth image

represents the per pixel depth value of the

corresponding texture image which is

exploited to generate novel views through

depth image based rendering (DIBR) .In

MVD format only few views with their

associated depth maps are coded and

transmitted. The compression of MVD data

is indeed an important activity in 3D

television framework and much attention

has been devoted to this research area. To

efficiently compress MVD data various

coding formats have been proposed and new

tools have been developed, e.g., [4–7].

Advanced Video Coding (H.264/AVC) has

been used in past to encode the texture

videos and depth videos independently, also

Page 2 of 9

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 15

known as simulcast coding. The novel High

Efficiency Video Coding (HEVC) [9] is the

current state of the art video coding tool.

The Joint Collaborative Team on 3D Video

Coding Extension Development (JCT-3V)

has recently developed extensions of HEVC

to efficiently encode multiview videos and

MVDdata. Multiview-HEVC (MV-HEVC)

[10] extends the HEVC syntax to encode

MVD without additional coding tools

whereas 3D-HEVC [11] is expressively

dedicated to the design of novel coding

techniques for MVD. 3D-HEVC encodes the

base view with its depth map using

unmodified HEVC whereas the dependent

views and their depth maps are encoded by

exploiting additional coding tools. 3D- HEVC achieves the best compression This

work was partially supported by Universit ́a

degli Studi di Torino and Compagnia di San

Paolo under project ratio for MVD data. To

achieve autostereoscopy additional

intermediate viewpoints can be generated

with DIBR on the receiver side. Given a

DIBR algorithm, the perceptual quality of

the rendered images depends on both texture

and depth image quality. Quality of the

depth map is particularly important as the

compression artifacts in depth maps can

cause structural and textural distortions in

the synthesized resulting in poor 3D

experience. 3D image and video quality

assessment is a more difficult and complex

problem compared to its 2D counterpart.

Earlier, 2D image quality metrics have been

used to quantify the quality of 3D images

(video plus depth) and stereoscopic images.

In this context, the 2D metrics have been

used in two ways: some metrics estimate the

quality by assessing each texture image

separately and aggregating the values

without considering the depth images.

Others exploit the depth maps in addition to

texture image quality

to predict the overall quality. However, due

to different nature of acquisition,

representation, transmission and rendering,

3D images are affected by different types of

quality Recent studies tested various

existing 2D image quality metrics to assess

the quality of stereoscopic and 3D images

and concluded that none of the existing 2D

quality metrics is suitable in this context.

Ekmekcioglu et.al proposed a 3D quality

assessment algorithm based on weighted

PSNR and SSIM . They propose to weight

each pixel quality value (PSNR or SSIM)

with the corresponding

depth value to increase the contribution of

pixels closer to the camera; indeed,

according to their study the closer the pixel,

the larger the impact on visual perception.

Page 3 of 9

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 16

The 3D QA proposed in combines SSIM

and C4with disparity estimation to compute

a single quality metric. The two measures

are then integrated (globally or locally) to

obtain the final quality value. Boev et. al.

[23] proposed a full-reference multi-scale

stereo video QA algorithm that computes the

monoscopic artifacts from the texture

images and stereoscopic artifacts from the

disparity images. Cyclopean images are

constructed from the reference and the test

stereopairs with block based matching;

SSIM is used to quantify the monoscopic

artifacts (2D artifacts like blur, noise, etc).

The perceptual disparity maps computed for

test and reference stereopairs are compared

to estimate the binocular distortions (e.g.

keystone, color distortion). Most existing 3D

quality metrics are full reference and few

consider depth maps in the evaluation. As

already described, quality of depth images is

very important due to their role in

intermediate view generation. Moreover, no- reference 3D quality evaluation is of

fundamental importance since the

corresponding original views may not be

available; indeed, cost, hardware and

bandwidth constraints usually impose to

capture a limited set of views and the quality

of the synthesized view must be estimated in

absence of the corresponding reference.

Furthermore, as the depth images are gray

scale textureless images usually consisting

of large homogeneous or linearly changing

regions with sharp edges representing

objects’ boundaries, the conventional 2D

visual quality metrics such as SSIM [20] are

not effective to assess the quality of depth

images. As an answer to the mentioned

issues, this paper proposes ‘Blind depth

quality metric’ (BDQM), a no-reference

algorithm to assess the quality of

compressed depth images. The major

contributions of the paper are:

• the proposal of a novel no-reference depth

quality metric BDQM for blind evaluation

of depth compression artifact;

• the shape of the histogram of compression

sensitive depth pixels is exploited to

estimate the depth quality; in particular, we

show that as the compression ratio is

increased the histogram around depth

transitions flattens because of smoothing;

• BDQM is used to predict the quality of

depth images undergoing HEVC

compression at various bitrates.

2. PROPOSED DEPTH IMAGE

QUALITY METRIC

The proposed quality metric works in two

steps; first, the compression sensitivity map

(CSM) of the depth image is computed to