Page 1 of 13

Journal for Studies in Management and Planning

Available at http://edupediapublications.org/journals/index.php/JSMaP/

ISSN: 2395-0463

Volume 03 Issue 07

June 2017

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 303

Enhancing Profitability through Strengthening TDQ Triangle- a Case of

Tirupur’s Hosiery Industry

Dr.M.Bina Celine Dorathy, Associate Professor, AMET University, 135, East Coast Road,

Kanathur-603112, Chennai, India, mail id: binachristina2003@gmail.com

Abstract

One of the objectives of an exporter is to maximize profitability. He achieves this effortlessly

in an assured market, but struggles as the market becomes increasingly competitive. Tirupur a

small town in Taminadu, India, became a major exporter of hosiery products to most of the

developed countries of the world after 1985. The industry suffered a set back when the

Quantitative Restrictions (QR) on textile trade was totally phased out by the WTO in 2005.

Tirupur’s exporters reaped hefty profits during the quota system as the value realization was

high. They now complain of lower profitability after the quota removal as competition has

increased and the market has shifted from a sellers market to that of a buyers market. Exporters

in Tirupur still prefer to stick on to buyer instructions for fear of rejection. They do not prefer to

try new designs and patterns. At this juncture this paper emphasizes the significance of

technology, design and quality in reducing costs in a competitive market. It also makes an

attempt to review the upgradations happening at Tirupur in these three core areas to cope with

the changing pattern of trade.

Key words: Technology, Design, Quality, Profitability

Introduction

While financial resources, human resources and infrastructure facilities are common for

all the firms, a firm can create a unique operating proposition by focusing on the three critical

areas for success namely constant upgradation of technology, strengthening its design

capabilities and continuous improvement in quality. One of the objectives of an exporter is to

maximize profitability. He achieves this effortlessly in an assured market, but struggles as the

market becomes increasingly competitive. Tirupur a small town in Taminadu, India, became a

major exporter of hosiery products to most of the developed countries of the world after 1985.

The industry suffered a set back when the Quantitative Restrictions (QR) on textile trade was

Page 2 of 13

Journal for Studies in Management and Planning

Available at http://edupediapublications.org/journals/index.php/JSMaP/

ISSN: 2395-0463

Volume 03 Issue 07

June 2017

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 304

totally phased out by the WTO in 2005. Tirupur’s exporters reaped hefty profits during the quota

system as the value realization was high. They now complain of lower profitability after the

quota removal as competition has increased and the market has shifted from a sellers market to

that of a buyers market. Hence an exporter has to carve out his own strategy for enhancing his

profitability by increasing value realization and decreasing his costs. It is a well known business

proposition that profit = Price – Cost. Technology, design and quality play an important role in

enabling an exporter to increase his profitability by increasing the value realization and reducing

the cost. Technology upgradation simultaneously reduces the unit cost of the product and

increases its value with a higher quality and fashion design. Design on the other hand is the result

of creativity and innovation and with the use of design technology the value realization can be

enhanced substantially by taking advantage of the higher market segments. Quality again

simultaneously reduces cost and increases value. Thus technology, design and quality are

interconnected and provide the firm with a framework for enhancing profitability in a

competitive market.

Fig. 1

TDQ – Profitability Triangle

TDQ - Technology, Design and Quality

Methodology

Both primary and secondary sources of information have been used for the study. Since

organized data was not available on Tirupur most of the information was gathered from primary

sources such as questionnaire and interviews. Primary data was collected from 50 hosiery export

units in Tirupur through a questionnaire. The information thus collected has been used to assess

the developments in technology, design and quality at Tirupur.

T

D

Q

FINANCIAL

RESOURCES HUMAN RESOURCE

INFRASTRUCTURE

PROFITABILITY

Page 3 of 13

Journal for Studies in Management and Planning

Available at http://edupediapublications.org/journals/index.php/JSMaP/

ISSN: 2395-0463

Volume 03 Issue 07

June 2017

Available online: http://edupediapublications.org/journals/index.php/JSMaP/ P a g e | 305

Status of Technology, Design and Quality in Tirupur

1. Technology

In Tirupur, individual firms have not set up any R & D facilities as such due to high cost.

But it is undertaken by support institutions such as Small Industries Development Organisation

(SIDO), National Small Industries Corporation (NSIC), Small Industries Service Institutes(SISI),

etc., and the result is passed on to the entrepreneurs. Most of the production in Tirupur is targeted

for the export market. Apparel designing along with quality improvements is the important

parameters for success. This in turn depends on the production technology used. Hence in

Tirupur the demand for machines that are capable of producing various types of combinations

and patterns is always on a constant rise. The agents and dealers of both indigenous and imported

machineries are based in Tirupur and they provide ample information on the latest models of

machineries available world wide. Superior technology gives a competitive edge to the industry

by increasing productivity, improving quality, design capabilities and decreasing cost. The

primary data reveals that 92% of firms are using imported technology. The secretary of Tirupur

Exporters Association (TEA) points out that with little or no chance of cost reduction the best

way to compete is through value added products for which again technology is very important.

He expressed that almost all the exporters in Tirupur have utilized Technology Upgradation

Fund Scheme (TUFS) for that matter.

Table 1

Technology adopted by firms

Source : Primary data

Generally diffusion of technical knowledge in India spreads through journals, trade publications,

on-site plant tours, word of mouth among suppliers and customers, employee migration and

internet sources. Recently technological transfers across national boundaries are taking place

Indigenous Imported Total

4 46 50