Page 1 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 897

Mix Design Approach For High 28 Days’strength, High-Volume, Low-Lime Fly Ash

Concrete

V. THULUKKANAM

DEPARTMENT OF CIVIL ENGINEERING

PRIST (Deemed to be University), THANJAVUR

ABSTRACT

The world is passing through difficult and troubled times, and we live in a rapidly changing

world. The construction industry is facing many challenges – global warming,climate change

forces, and the capability to achieve sustainable development andeconomic progress without

damaging our environment. The concrete industry inparticular faces further challenges. There

is extensive evidence to show that concretematerials and concrete structures all over the

world are deteriorating at a rapid rate, andthat we are unable to ensure their long-term durable

service life performance. Toconfound this situation, we are also faced with an urgent need to

regenerate ourinfrastructure systems if we are to eradicate poverty and provide a decent

Quality of Lifefor all the peoples of the world. This report shows that the current emphasis on

highstrength and very high strength, and the design philosophy of Durability through

Strengthfor concrete materials and concrete structures is fundamentally flawed.

INTRODUCTION

Worldwide, roadway transportation

systems are some of the most widely used,

maintained, and visible public facilities. In

2006 alone, American drivers drove

3.0trillion vehicle-miles along nearly 4

million miles of public roadways. While

there is littleargument over the need to

expand and maintain roadway

infrastructure systems aroundthe world to

spur both economic development (in

developing countries) and

continuedprosperity (in developed

countries), the continuing trends of

unsustainable materialproduction, roadway

construction, operation, deterioration,

repeated repairs, anddemolition are

alarming.

Unsustainable material production for

concrete pavements begins with the

production of Portland cement. The

mining, calcining, and grinding of Portland

cement contributes nearly 5% of global

anthropogenic greenhouse emissions,

Page 2 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 898

making the cement andconcrete industries

a major contributor to global climate

change. Following this initialconstruction,

poor maintenance of concrete pavements

can lead to excessive deteriorationand

associated repair needs. As recently as

2009, the American Society of

CivilEngineers assigned grades of C and D

to America’s bridges and roads,

respectively [3].

This deteriorated state can lead to

repeating cycles of short-term repair

scenarios, which result in increased

material consumption of repair materials

and fuels. In addition to material

consumption, the sustainability of

pavement systems also extendsto the

vehicles traveling over the pavement.

Automobiles and trucks release 34% of

USanthropogenic greenhouse emissions.

Associated with every construction

andmaintenance event is traffic congestion

that results in increased fuel use and

emissions.Moreover, emissions from

traffic increase as pavement roughness

increases throughoutservice life. Together

these phenomena comprise a significant

piece of the unsustainablestate of current

concrete pavement technologies.

While increased maintenance and

rehabilitation funding initiatives such as

the American Recovery and Reinvestment

Act in the United States are important to

maintaining the infrastructure system in

useable condition, greater maintenance

funding will not solve the significant

sustainability challenges facing concrete

pavement systems. A more fundamental

solution for concrete pavements, both

reinforced and unreinforced, is neededthat

approaches both the material and system

impacts described earlier. While

concretematerials are both economical and

simple to construct, their lack of durability

hasconsistently been problematic. Many

methods have been proposed to improve

concretedurability, such as the use of high

strength concrete, expensive concrete

admixtures, orepoxy coated reinforcement.

However, few solutions have targeted the

inherent shortfallof concrete as a brittle

material, which cracks under load. These

cracks are the cause ofmost corrosion and

durability problems, ultimately leading to

oxidation of steelreinforcement, concrete

faulting, and pavement failure. To

effectively solve the serioussustainability

challenges facing concrete pavement, a

fundamental solution reducing thebrittle

nature of concrete is proposed.

Page 3 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 899

LIFE CYCLE ASSESSMENT TO

GUIDE SUSTAINABLEECC

OVERLAYDESIGN

Life cycle assessment (LCA) is an

analytical technique for assessingpotential

environmental burdens, social impacts,

and economic coststhereby measuring

progresstoward sustainability [17].

Togetherthese broad metrics form the

triple bottom line ofcurrentsustainability

indicators. Based on defined framework

boundary,LCAs quantifythe potential

consumption and impacts throughout

aproduct’s life cycle from raw

materialacquisition throughproduction,

use, and disposal [18]. An LCA model of a

pavementoverlay system was developed

by Zhang et al. [19] and its application to

ECC overlays is presented.

Life Cycle Model

The LCA model for pavement overlays

divided into six modules:material

production,consisting of the acquisition

and processing ofraw materials;

construction, including allconstruction

processes,maintenance activities, and

related construction

machineusage;distribution, accounting for

transport of materials and equipment to

and from the construction site; traffic

congestion, which models all construction

and maintenance related traffic congestion;

usage,including overlay roughness effects

on vehicular traveland fuelconsumption

during normal traffic flow; and end of life,

whichmodels demolitionof the overlay and

processing of the materials.Details of each

module are described inZhang et al. [19].

Input andoutput data from each module are

evaluated to capture

thematerialconsumption, energy

consumption, and environmental impacts

ofthe overlaysystem throughout its service

life. Several datasets arerequired to

provide the life cycleinformation for input

materials orprocesses. For example, the

dataset for ECC productionprovides

theraw material consumption, total

primary energy

consumption,pollutantemissions, and

wastes associated with producing a

unitvolume of ECC. Raw

materialconsumption quantifies the non- fuelmaterial inputs, such as the mass of

cement required.

Total primaryenergy consumption includes

the energy required for

extraction,refining,transportation, and

processing the material. The air andwater

pollutant emissions andsolid wastes are