Page 1 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 876

Traffic Flow Modeling Under Heterogeneous Traffic Conditions

M. VENKATESAN

DEPARTMENT OF CIVIL ENGINEERING

PRIST (Deemed to be University), THANJAVUR.

Abstract

A comprehensive methodology for modelling the heterogeneous traffic is presented in this

article. Considering the no-lane discipline and the presence of various sizes of vehicles,

several microscopic and macroscopic traffic variables are analysed for their suitability in

describing the heterogeneous traffic. Applicability in the modelling process and the feasibility

in collecting field data are the important criteria used in deciding the suitable traffic variables.

In place of occupancy, its variant termed as area occupancy was found to be suitable in

describing the heterogeneous traffic.

INTRODUCTION

Traffic composed of identical vehicles and

following the lane discipline is termed as

homogeneous. Traffic comprising of

motorised and non-motorised two- wheelers (TWs) and three-wheelers along

with several other vehicles with no-lane

discipline is termed as heterogeneous. This

heterogeneous traffic is clearly different

from the one with the presence of trucks

which has also been termed as

heterogeneous traffic. The absence of lane

discipline results in vehicular movement

that is influenced by the presence of

vehicles in the front as well as on the

sides. This led to a complex traffic

behaviour and it cannot be analysed by

using conventional microscopic and

macroscopic traffic variables. Using

conventional measurement techniques, it is

also difficult to collect the data. Modelling

methodology to be adopted in these

conditions would also be considerably

different compared to the existing traffic

modelling methodologies. Traffic flow

variables, relationships among the

variables and the observed data on these

variables are the crucialinputs for the

traffic flow modelling purposes. Any

efforts in the area of traffic flow modelling

should consider the above aspects and it is

even more crucial when dealing with the

heterogeneous traffic. In this scenario,

formulating new theoretical and modelling

concepts or adopting the conventional

Page 2 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 877

microscopic and macroscopic traffic flow

concepts are the available alternatives for

the researchers.

Several researchers (Chari and Badarinath

1983, Palaniswamy et al. 1985,

Ramanayya 1988, Kumar 1994, Singh

1999, Oketch 2000) have attempted to

model the heterogeneous traffic and most

of these models are microscopic in nature.

Some researchers (Chari and Badarinath

1983, Singh 1999) have proposed

alternative measures for density, but where

exactly they fit into the overall modelling

process and the relationship with the other

traffic variables were not clearly

discussed. Explicit vehicular interactions

under varying traffic conditions are

modelled in these studies. Vehicle

composition and the gap maintaining

behaviour were the important input data to

these models. In most of these studies,

video recording techniques were utilised in

collecting the data on vehicular

interactions. Video recording technique

requires extensive manpower to collect the

data on vehicular interactions and is prone

to error. Some other data collection

techniques, such as dualloop detectors,

image processing-based traffic data

collection techniques, can be used to

estimate vehicle lengths which in turn can

be used in estimating vehicle width (Lan

and Kuo 2002). Using these techniques,

vehicle lengths under free-flow conditions

can be found with a fair amount of

accuracy. To overcome the errors observed

in forced-flow conditions in measuring

vehicle lengths, Zhang et al. (2005)

proposed a new dual-loop algorithm which

can handle erroneous raw loop actuation

signals. Lateral gap data that are equally

important to model the vehicular

interactions can be collected using a

recently developed image processing

software called TRAZER (Mallikarjuna et

al. 2009). Implementing the cellular

automata (CA) concept for modelling the

heterogeneous traffic has been suggested

by some researchers (Lan and Chang 2005,

Hsu et al. 2007, Mallikarjuna and

Ramachandra Rao 2009). Lan and Hsu

(2006) have proposed new variants for

density and flow using the modified CA

structure developed for modelling the

heterogeneous traffic. These variants have

been derived based on generalised

definitions for speed, flow and the density

(Edie 1965, Maerivoet 2006). Mallikarjuna

and Ramachandra Rao (2006) have

proposed a new variant for occupancy

termed as area occupancy and this variable

was found to be suitable for CA-based

modelling methodology. Mallikarjuna and

Page 3 of 5

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 05

May 2019

Available online:https://ejbss.org/ P a g e | 878

Ramachandra Rao (2009) have proposed a

detailed methodology in formulating the

CA structure for modelling the

heterogeneous traffic. Field traffic data

collected using the video image

processing-based software, TRAZER

(Mallikarjuna et al. 2009), has been

utilised in formulating this CA structure.

In this article, an effort is made to develop

a comprehensive methodology to model

the heterogeneous traffic. While choosing

the appropriate traffic variables, factors

such as the usefulness in describing the

traffic, data measurability and usefulness

in modelling are taken into consideration.

Important microscopic variables, such as

lateral gaps, longitudinal gaps and lateral

distribution of vehicles have been utilised

in formulating the CA structure. Data

collected on these variables using video

image processing software, TRAZER,

have been analysed. Relationship between

area occupancy and a variant of flow

measured in terms of cells has been

utilised in calibrating and validating the

proposed CA model. Model validation was

done using the field data collected on

different road sections. Data collected

from the simulation model in terms of

cells, which are the basic units of vehicles

in the modified CA structure, are found to

be conforming to the fundamental traffic

flow theory. The organisation of the

remainder of this article is presented

below.

CALIBRATION AND VALIDATION

OF THE CA MODEL

In this study the macroscopic traffic

variables, such as flow, speed and density

are defined differently to incorporate the

heterogeneous nature of the traffic (Lan

and Hsu 2006, Mallikarjuna and

Ramachandra Rao 2006). The basis for

these modifications follows conventional

traffic measurements over a general

measurement region (Figure 1). Since lane

discipline is absent under heterogeneous

traffic conditions, measurements taken

over a single lane have no relevance under

these conditions. To overcome these

problems, each cell (which is a part of the

vehicle) is considered as one vehicle and

each sub-lane is considered as one lane

while taking measurements over the

general measurement region (Figure 4).

On account of the above assumptions, the

cells (unit vehicle size) inevitably follow

the lane discipline. A measurement region

of width W, length L and at time T is

considered while taking the measurements.

The traffic variables, such as flow, speed