Page 1 of 15

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 1911

Performance Enhancement Ofof Solar Air Heater

SETHURAMALINGAM.K

Abstract

A solar energy system at a conceptual level consists of elements of

energy collection, distribution and warehousing, seeking to supply the best

possible combination of efficiency, low initial and running costs, robustness and

durability. In drying applications and for the heating of the building space, solar

energy has an important role to play, as it provides an enormous amount of heat

energy where the air is the final receiver of the heat energy.

Flat plate collectors are good enough for heating air, but the technology

and applications of the solar air collectors have not been so developed as liquid

solar collector. The solar dryer consisting of two different flat plate collector

configurations namely Single Glass Single Pass Solar Air Heater (SGSPSAH) is

used in this study. The heat storage in the flat plate collector is done using the

porous medium such as charcoal, black stone, black gravel, sand, packed water

and so on.

I. INTRODUCTION

Nowadays, solar energy is utilized in many applications such as

space heating and drying which are eco-friendly and renewable resources.

Supranto et al (1999) stated that one of the most promising applications of

solar energy is the drying of the agricultural products, directly used in some

cases and in some other cases, collected, stored or even processed for a

desired result. A solar energy system, at a conceptual level, has components

for energy collection, distribution and storage. Solar energy has certain

positive and negative attributes when it is applied in thermal processes.

The major technical obstacle for the solar applications is the

intermittent and volatile nature of the resource, both on daily and shorter time

Formatted

Page 2 of 15

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 1912

scales. It is the intermittency of the solar radiation that leads to a heat storage

requirement. The solar collectors are used to accumulate the required amount

of the solar energy, and they have a wide range of applications such as the

drying of the agricultural products, space heating and air-conditioning,

industrial processes (textile, paper) and so on. Many researches have been

carried out in this area, providing various innovations and utilities of the solar

collectors with various forms and modifications for the application-based

performance improvements, and some of the solar collector are given below:

 Simple Flat Plate Collector

 Finned Plate Collector

 Corrugated Plate Collector

 Overlapped Transparent Plate Type Collector

 Matrix Type of Collector

 Transpiration Collector

II. MATERIALS AND METHODS

In this study, there are two methods of solar air heating

systems designed and fabricated with different configurations concentrating

on the forced convection to increase the mass flow rate of the processed air.

The first method is fabricated as a single glass single pass solar air heater

(SGSPSAH) with the conventional measuring system and the second one is

fabricated as a single glass double pass solar air heater (SGDPSAH) with a

virtual measuring system such as data acquisition with LabVIEW. Portable

blower is used in SGSPSAH, and the turbo-ventilator is used in SGDPSAH

for forced convection operation. First, the experimental procedure of

SGSPSAH is illustrated, and then that ofSGDPSAH.

Material selection for solar air heater

Highly thermal conducting materials can be used as an absorber

plate such as mild steel, aluminum, copper and so on. Copper material is

Page 3 of 15

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 1913

being used in this work because of its higher thermal conductivity. Clear

glass, plastic sheets and plastic films are the commonly used materials for

the absorber cover. The clear glass is being selected based on the optical

property such as transmittance of the solar radiation. In general, SAH

insulation is usually of polyurethane foam or mineral wool, and also mineral

fiber insulating materials such as glass wool, rock wool and fiberglass are

used. Glass wool has been used as an insulating material in this work and it

has the very low thermal conductivity, higher thermal resistance, and

reduced the heat loss through conduction. Absorber plate commonly coated

with black shade. Black shade paints which can be manually applied to the

absorbers with either brushes or sprays. The selective paint layers provide a

degree of absorption above 90%. Galvanized selective coatings include

black chrome, black nickel, and aluminum oxide with nickel. In this work

galvanized matt black coating is being considered based on the low

emission and cost effectiveness. Mild steel is being considered for the

fabrication of the collector box, drying room and chimney. Table 1 gives the

details of the selected materials for the SAH.

Table .1 Material selection of SAH

Sl. No. Part Name Material

1 Absorber Copper

2 Absorber cover Glass

3 Absorber coating Galvanized Matt black coating

4 Insulator Glass wool

5 Collector box Mild steel

6 Drying chamber Mild steel

7 Chimney Mild steel