Page 1 of 10

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 153

Experimental Study on Mechanical Properties of Self

Curing Concrete

Syed Viqar Malik1

, Anurag pendiyala2

1Assistant Professor, Department of Civil Engineering, Vaagdevi College of Engineering,

Viqar.malik@gmail.com

2UG Student, Department of Civil Engineering, Vaagdevi College of Engineering

pendiyalaanurag@gmail.com

ABSTRACT

The rising cost of construction materials in developing countries has necessitated research

into the use of alternative materials civil engineering construction. Today concrete is most

broadly utilized development material because of its great compressive strength and

durability. It is normal that the present utilization of concrete on the planet is of the request

of 10 billion tones each year. The strength and durability of concrete will be completely

modern just on the off chance that it is restored. Because of the curing of concrete huge

measure of water is required. To conquer the high utilization of water it is neededto

contemplate self-curing concrete. Self-curing is likewise alluded as Internal-Curing. Self- curing concrete is one of the specific concretes in palliating inadequate curing because of

human dismissal and furthermore because of shortage of water in dry territories, detachment

of structures in hard landscapes and in zones where the nearness of fluorides in water will

severely influence the attributes of concrete. The present investigation includes the utilization

of shrinkage diminishing admixtures in concrete which helps in self-curing and aides in

better hydration and thus strength.

1.1. INTRODUCTION

Self - curing is a procedure that can be utilized to supply extra dampness in concrete for

included viable hydration of bond and decreased self-parching. It was discovered that water

solvent alcohols can be utilized as self-curing operator in concrete. The utilization of self- curing admixtures is critical from the purpose of vision that water assets are getting important

consistently. New improvements in curing of concrete are on the prospect too. In the

following century, motorization of the situation, conservation, and evacuation of curing mats

and covers will progress as execution based arrangement figure curing for getting and

installment. Also, viable sealants and intensifies that keep the loss of water and advance wet

Page 2 of 10

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 154

curing conditions will be sought after. Self-curing concrete ought to end up existing not long

from now.

Self-curing concrete is give to retain water from wetness from air to acknowledge well

hydration of strengthen in concrete. It take care of the issue when the amount of bond

hydration is bring down because of no curing or unseemly curing by utilizing a self-curing

specialist like poly-acrylic corrosive which has solid capacity of intriguing dampness from

the idea and giving water basic to curing concrete. M.V.Jagannadha Kumar et al,

contemplated that the ideal measurement of PEG400 for greatest strengths (compressive,

ductile and modulus of break) was make to be 1% for M20 what's more, 0.5% for M40

evaluations of concrete. As extent of PEG400 improved droop expanded for both M20 and

M40 evaluations of concrete. Strength of self-curing concrete is keeping pace with traditional

concrete. Self-curing concrete is reaction to numerous issues looked because of absence of

appropriate curing. A. Aielstein Rozario et al, said that the penetrability of concrete

abatements with an expansion in the supplanting of fly cinder with bond and moreover of

P.E.G measurements. So the entrance of synthetic concoctions is diminished with the

including of PEG and the concrete is sheltered next to sulfates. The extent of weight

reduction of the concrete examples is likewise decline for each review of concrete. From the

outcomes, we realize that the self-curing concrete has the capacity to oppose the current

sulfates in the dirts and in the ocean waters. It very well may be prudent, so it very well may

be adoptable for development. Stella Evangeline et al, have researched the Strength

Variations in Concrete by Using overly spongy polymer and polyvinyl liquor as shrinkage

decreasing admixtures. Polyvinyl liquor is included different extents are 0.03%, 0.06%,

0.12%, 0.24%, 0.48%. It was build up the compressive strength, flexural strength, elasticity.

The greatest compressive strength, flexural strength and elasticity is set up separately 33.7

N/mm2, 8.0 N/mm2,4.945N/mm2 for 28 days.

This paper displays the aftereffects of compressive and flexural strength on concrete

containing lake cinder as fractional substitution of bond and afterward expansion of overly

spongy polymer and polyvinyl liquor. For this work, M30 review concrete was utilized and

the tests were led for different extents of lake fiery debris of 0-30%. Furthermore, including

S.A.P of 0-0.6% and PVA of 0-0.50% in concrete. The outcomes got were contrasted and

regular concrete.

1.2. OBJECTIVES

Page 3 of 10

European Journal of Business &

Social Sciences

Available at https://ejbss.org/

ISSN: 2235-767X

Volume 07 Issue 04

April 2019

Available online: https://ejbss.org/ P a g e | 155

The objective of this study is to experimentally investigate the mechanical properties of self- curing concrete

 To reduce water quantity in curing periods.

 To increase the compressive strength of concrete in self-curing method.

 The scope of the paper is to study the effect of Polyvinyl alcohol on strength

characteristics of Self-curing concrete.

The Compressive and tensile strength of self-curing Concrete for 7 and 28 days is found out

and compared with conventional concrete of similar mix design.

2.0. EXPERIMENTAL STUDY

2.1 MATERIALS:

Cement- Ordinary Portland cement (grade) conforming to IS: 12269: 1987 passing through 9

micron sieve having specific gravity of 3.12

Fine Aggregate- Fine aggregate conforming to IS: 383-1970 brought from local sand fill

having specific gravity of 2.6 and maximum size 4.75mm.

Coarse aggregate- Course aggregate of maximum size 20mm is taken having specific

gravity 2.82.

Water- Tap water is selected

Chemical admixtures

Super absorbent polymer:

The common SAPs are further at rate of 0–0.6 wt of cement. The SAPs are covalently cross- linked.

Polyvinyl alcohol:

Polyvinyl alcohol is formed commercially frompolyvinyl acetate, regularly by a continuous

process.The acetate groups are hydrolyzed by ester transaction with methanol in the presence

of anhydrous sodium methylate or aqueous sodium hydroxide.